DBDirt Bike Finder
MotocrossEnduroOff-roadTrailMiniDual-sport
Suspension & Setup

Dirt Bike Sag Calculator

Sag is how far the bike settles from fully extended. Measure from a fender mark to the axle with the bike on a stand, then on the ground.

Inputs
Results
Live

  • Sag

    105mm

  • Percent of travel

    33.3%

  • Travel remaining

    210mm

  • Typical target

    95–110 mm

  • Vs target

    In range

Formula

Sag = unloaded length − loaded length

Related calculators

Race Sag
Race sag (rider sag) is measured with the rider in full gear, balanced on the pegs. Most MX bikes want about 100–108 mm on ~310 mm travel.
Rider Sag
Front and rear rider sag together. Enter fender-to-axle (or a zip-tie on the fork stanchion) for each end.
Static Sag
Static sag is bike-only, no rider. Too little static sag with correct race sag means the spring is too soft (you used a lot of preload). Too much static sag means the spring is too stiff.
Spring Rate
Estimate fork and shock spring rates from rider weight, sag targets, and linkage leverage. A starting point for ordering springs — not a replacement for a tuner.